Incorporation of organic liquids into geopolymer materials - A review of processing,properties and applications

Geopolymers, composed of an amorphous three-dimensional inorganic network and synthesized by the activation of a solid alumino-silicate precursor with an alkaline activating solution, have attracted increasing attention because of their environmental benefits and favorable characteristics. This review deals with the development of organic/inorganic composite materials made by adding organic liquids into inorganic geopolymer matrices. Firstly, the incorporation processing approaches are presented and are divided into three categories: (i) Direct incorporation, (ii) Pre-emulsification (iii) Solid impregnation. Their main advantages and drawbacks are discussed in relation to the aimed properties. Secondly, this review highlights that geopolymers are low-cost candidates allowing technologically significant applications, through the incorporation of various organic liquids. Aside from the well-studied immobilization of industrial waste streams commonly known as stabilization/solidification (S/S), the development of highly porous geopolymer foams and the design of reinforced organic/inorganic composite matrices are being notably investigated. This review aims at summarizing the main published results, and fostering further investigations into innovative uses of organic liquids incorporated into geopolymers for a wide range of applications.     

Synthesis of cubic and monoclinic hafnia nanoparticles by pulsed plasma in liquid method

Hafnia (HfO₂, hafnium dioxide) is a wide band gap and high-κ material, and the metastable cubic hafnia has a much higher permittivity compared with the normal monoclinic hafnia. Here, we employ a one-step process, the pulsed plasma in liquid (PPL) method to synthesize two types of hafnia nanoparticles (NPs): one which is mainly in cubic phase (cubic: 81.7 at%, monoclinic: 18.3 at%) and the other which is in monoclinic phase. High-resolution transmission electron microscopy images showed that the particles were small (particle size ~3 nm). X-ray absorption fine structure analysis showed no chemical shifts, indicating that the synthetic hafnia NPs contained no oxygen vacancy. The synthetic hafnia NPs mainly in cubic phase showed a much higher relative permittivity than that of the commercial hafnia (monoclinic), and have a larger band gap than the synthetic monoclinic hafnia NPs.     

Synthesis of Ti3C2Fx MXene with controllable fluorination by electrochemical etching for lithium-ion batteries applications

Ti₃C₂T_x MXene has attracted remarkable attention due to its promising applications in energy storage and sensors. However, traditional MXene preparation methods used HF as etchant, which was highly toxic and harmful to human and environment. Moreover, the aqueous etchants will also result in the combination of OH, O and F groups on the surfaces, making it difficult to control the varieties and contents of the surface terminations. In this paper, a green and mild electrochemical exfoliation method was proposed to synthesize Ti₃C₂F_x and synchronously control its fluorination degree on the surface. A non-aqueous ionic liquid, [BMIM][PF₆]-based solution was used as electrolyte. The as-prepared Ti₃C₂F_x was fluorinated with the CF and TiF₃ groups, which were electrochemically active and contributed to the excellent cycling stability of the MXene anode-based Li-ion batteries. These findings provided a facile strategy to prepare MXene materials and dope MXene with tailored property for MXene-based energy devices applications.     

Liquid Marble Patchwork on Super-Repellent Surface

Liquid marble (LM) is a droplet that is wrapped by hydrophobic solid particles, which behave as a non-wetting soft solid. Based on these properties, LM can be applied in fluidics and soft device applications. A wide variety of functional particles have been synthesized to form functional LMs. However, the formation of multifunctional LMs by integrating several types of functional particles is challenging. Here, a general strategy for the flexible patterning of functional particles on droplet surfaces in a patchwork-like design is reported. It is shown that LMs can switch their macroscopic behavior between a stable and active state on super-repellent surfaces in situ by jamming/unjamming the surface particles. Active LMs hydrostatically coalesce to form a self-sorted particle pattern on the droplet surface. With the support of LM handling robotics, on-demand cyclic activation–manipulation–coalescence–stabilization protocols by LMs with different sizes and particle types result in the reliable design of multi-faced LMs. Based on this concept, a single bi-functional LM is designed from two mono-functional LMs as an advanced droplet carrier.     

[Zr0.73(Cu0.59Ni0.41)0.27]87Al13合金过冷液相区热塑性成形研究

为探究[Zr_(0.73)(Cu_(0.59)Ni_(0.41))_(0.27)]_(87)Al_(13)非晶合金的热塑性成形性能以及绘制其对应的热加工图谱,用Gleeble3500型热模拟压缩实验机对该非晶合金进行不同参数下的热模拟压缩实验。结果表明,合金在压缩过程中变形行为由牛顿流变演变为非牛顿流变;同时,过高或过低的热加工温度均能导致合金晶化;进一步对数据分析得到该合金在不同热塑性成形参数下的功率耗散图与流变失稳图,并绘制出相应的热加工谱图,谱图分析结果表明,该合金在温度为420与430℃、应变速率为10~(-3) s~(-1)时具有较高功率耗散系数且没有失稳区域,因此,合金可选的热塑性加工参数为温度420～430℃,应变速率10~(-3) s~(-1)。     

环形通道内液态铅铋合金流动换热特性实验研究

通过对环形通道内液态铅铋合金的流动换热特性进行实验研究，得到了气泡泵注气对液态金属流动的影响，并拟合出环形通道内液态铅铋合金的摩擦系数关系式和换热特性关系式。结果表明：采用气泡泵注气能有效提升铅铋合金的质量流速；相同Reynolds数下环形通道内液态铅铋合金的摩擦系数大于由布拉休斯公式计算得到的摩擦系数；液态铅铋合金对流换热过程中，导热项占主导地位，并且Nusselt数随Peclet数的增大而增大。     

Ab Initio Molecular-Dynamics Simulation Liquid and Amorphous Al_94-xNi₆La_x (x=3-9) Alloys

Ab initio molecular-dynamics simulations have been used to investigate the liquid and amorphous Al94-xNi6Lax (x=3-9) alloys. Through calculating the pair distribution functions and partial coordination numbers, the structure and properties of these alloys are researched, which will help the design bulk metallic glass. The concentration of La atoms can affect the short-range order of Al94-xNi6Lax alloys, which is also studied in this calculation result.     

超高效液相色谱法测定清咽糖中6种绿原酸类化合物的含量

目的建立超高效液相色谱法同时测定清咽糖中新绿原酸、绿原酸、隐绿原酸、3,4-O-二咖啡酰基奎宁酸、3,5-O-二咖啡酰基奎宁酸和4,5-O-二咖啡酰基奎宁酸6种绿原酸类化合物的含量。方法采用Agilent Eclipse Plus C18 RRHD色谱柱(2.1 mm×150 mm, 1.8μm),以乙腈、0.4%磷酸水溶液为流动相,梯度洗脱,流速0.8 mL/min,检测波长327 nm,柱温35℃。结果 6种成分在相应的线性范围内呈良好的线性关系。精密度、重复性、稳定性实验中6种成分峰面积的相对标准偏差均小于3.0%,平均加样回收率为93.77%～104.37%,相对标准偏差为0.28%～1.86%。结论该方法具有良好的专属性和重现性,加样回收率实验符合要求,结果准确、稳定,适用于同时测定清咽糖中新绿原酸、绿原酸、隐绿原酸、3,4-O-二咖啡酰基奎宁酸、3,5-O-二咖啡酰基奎宁酸和4,5-O-二咖啡酰基奎宁酸的含量。     

A Novel Strategy for Preparing Stretchable and Reliable Biphasic Liquid Metal

Low‐melting liquid metal is a hugely promising material for flexible conductive patterns due to its excellent conductivity and supercompliance, especially low‐cost and environmental liquid processing technology. However, the ever‐present fluidity characteristic greatly limits the stable shape and reliability of prepared liquid metal conductive electronics. Herein, a novel solidification strategy of liquid GaIn alloys by Ni doping and heat treatment is first reported, which can efficiently create a solid phase in the liquid metal and provide an effective solution for practical applications. Particularly, the liquid characteristic is preserved for conveniently fabricating different flexible electronic circuits, and then the solidification is carried out on prepared conductive patterns by heat treatment. The solidification mechanism is revealed by the interface chemical reaction between Ni and GaIn, creating the solid phase of intermetallic compound (Ga₄Ni₃ and InNi₃) during heat treatment. Moreover, a biphasic GaInNi can be obtained by regulating the atomic ratio of gallium, indium, and nickel. As a result, the obtained GaInNi possesses extremely low sheet resistance (15 ± 4.5 to 135 ± 2.5 mΩ sq^?1) and the variation of ΔR/R₀ exhibits low level (0–2) when strained up to 100%, which offers a promising strategy to prepare stretchable and reliable liquid metal electronics.     

Preparation and characterization of highly stable protic-ionic-liquid membranes

A highly durable proton exchange membranes (PEM)s based on covalently supported ionic liquid (IL) bearing sulfonic acid imidazolium groups were successfully fabricated. The membrane preparation involved radiation induced grafting of 1-vinyl imidazole (1-VIm) onto poly(ethylene-co-tetraflouroethene) (ETFE) film, followed by covalent immobilization of 3-sulfopropyl and subsequent treatment with trifluoromethanesulfonic acid. The ionic conductivity of the supported IL membranes was increased with the increase in the concentration of IL and reached a maximum value of 138 mS cm⁻¹ in a fully hydrated state with an ion exchange capacity of 4.82 mmol g⁻¹ that is higher than Nafion with a similar thickness. The membranes displayed excellent chemical and mechanical stability. In addition, the dimensional and thermal stability of supported IL-membranes were significantly higher than commercial Nafion membranes.